Chem1811 Echem lab 1 LabTalk

Chem1811 Echem lab 1 LabTalk

TLDR;

The experiment introduces galvanic cells and the principles needed to build and analyze them. It explains oxidation and reduction, electron flow, the role of electrolytes and salt bridges, standard reduction potentials, cell notation, and the Nernst equation. The practical procedure compares metal reactivity, measures cell potentials under standard and nonstandard conditions, and emphasizes making measurements quickly to limit changes in the cells.

  • Oxidation releases electrons; reduction accepts them. Both occur together in a redox reaction.
  • A galvanic cell uses a spontaneous redox reaction to produce electrical energy. The anode is where oxidation occurs, and the cathode is where reduction occurs.
  • The salt bridge maintains electrical neutrality by allowing ions to migrate between half-cells.
  • A positive cell potential indicates a spontaneous reaction as written; nonstandard potentials can be estimated with the Nernst equation.
  • In the experiment, observe metal–solution reactions, assemble half-cells, measure voltages, and compare measured values with predictions.

Redox Reactions, Electrolytes, and Cell Types [0:04]

Oxidation occurs when a species loses electrons, making its formal charge more positive. Reduction occurs when a species gains electrons, making its formal charge more negative. Because charge is conserved, oxidation and reduction always occur simultaneously; together, they form a redox reaction.

In solid materials, electrons carry electrical charge, while ions carry charge through solutions. An electrolyte is a substance that dissociates fully or partly into ions in a solvent, allowing the solution to conduct electricity. Electrochemical cells fall into two broad types: galvanic (or voltaic) cells, which produce electrical energy from spontaneous reactions, and electrolytic cells, which require an external energy source to drive nonspontaneous reactions. Producing aluminum from bauxite is an example of an energy-intensive electrolytic process.

Building a Zinc–Copper Galvanic Cell [4:24]

When zinc metal is placed directly into a copper(II) solution, copper metal deposits on the zinc while the solution’s blue color fades. The reaction can be separated into two half-cells: a zinc electrode in a zinc-ion solution and a copper electrode in a copper-ion solution. Connecting the half-cells with a wire and salt bridge creates a galvanic cell that can deliver electrical energy to a device or be measured with a voltmeter.

At the zinc anode, zinc is oxidized: Zn(s) → Zn²⁺(aq) + 2e⁻. At the copper cathode, copper ions are reduced: Cu²⁺(aq) + 2e⁻ → Cu(s). The electrons travel through the external circuit from anode to cathode. A switch can interrupt the circuit and stop the reaction, unlike direct contact between zinc and copper ions, where the reaction continues until a reactant is used up or the zinc is removed.

Salt Bridges, Cell Notation, and Standard Conditions [9:08]

The salt bridge maintains electroneutrality, meaning that positive and negative charges remain balanced in each half-cell. As zinc ions form at the anode, negatively charged ions from the bridge enter that solution. As copper ions are removed from the cathode solution to form copper metal, positively charged ions from the bridge enter to balance the remaining negative charge. The bridge’s electrolyte should be concentrated enough to supply ions and chemically inert toward the cell’s other substances; its composition must therefore be chosen carefully.

Redox couples are conventionally written as oxidized form/reduced form. In cell diagrams and standard cell notation, the anode is written on the left and the cathode on the right. A single vertical line represents a phase boundary, while a double line represents the salt bridge. Under standard conditions, dissolved species are generally at 1 M activity, gases are at 1 bar, and the temperature is 25°C; the measured voltage under these conditions is the standard cell potential.

Standard Reduction Potentials and Cell Spontaneity [13:46]

Standard reduction potentials are measured relative to the standard hydrogen electrode (SHE), assigned a potential of zero. A potential’s positive or negative sign indicates its value relative to this reference; a negative reduction potential does not mean that the reaction cannot occur, but that the species is less inclined to accept electrons than the reference under the stated convention.

The cell potential is calculated as E°cell = E°cathode − E°anode, using the standard reduction potentials for both half-cells. A positive cell potential corresponds to a negative Gibbs free-energy change and a spontaneous reaction in the direction written: ΔG = −nFEcell, where n is the number of moles of electrons transferred and F is Faraday’s constant. In the zinc–copper example, copper’s reduction potential of +0.34 V is higher than zinc’s −0.76 V, so copper is the cathode and zinc is the anode; the cell potential is +1.10 V. Reversing the reaction would require external energy.

Standard reduction potentials are not multiplied when half-reactions are scaled to balance electrons. Their values are intensive quantities, so balancing a reaction changes its coefficients but not its tabulated potential.

Cell Notation and the Nernst Equation [24:19]

For the zinc–copper cell, the standard notation is Zn(s) | Zn²⁺(aq) || Cu²⁺(aq) | Cu(s). It reflects the cell’s physical arrangement: the anode and its electrolyte appear on the left, the cathode and its electrolyte on the right, and the double line marks the salt bridge. As the cell operates, the zinc electrode loses material while copper deposits on the cathode.

When concentrations or gas pressures differ from standard conditions, the cell potential changes according to the Nernst equation. It relates the actual cell potential to the standard potential and the reaction quotient, Q, which is calculated from product and reactant activities raised to their stoichiometric powers. Pure solids and pure liquids are omitted from Q. At equilibrium, Q becomes the equilibrium constant; under standard conditions, Q is 1 and the equation reduces to the standard cell potential.

At 25°C, the base-10 form is Ecell = E°cell − (0.0592/n) log Q. The video demonstrates applying this equation to a cadmium–hydrogen cell with specified concentrations and hydrogen pressure: write the balanced cell reaction, construct Q, and substitute it along with the standard potential and electron-transfer number. The same approach will be used in the lab to compare predicted and measured potentials.

Experiment: Metal Reactivity and Standard Cell Potentials [35:53]

The experiment aims to construct galvanic cells, identify their reactions, test combinations of electrodes and electrolytes, and measure cell potentials. It also examines how changing conditions affects the potential and whether the Nernst equation predicts the observed change.

First, dip metal strips into solutions containing other metal ions—for example, zinc in copper solution, magnesium in copper solution, or magnesium in zinc solution—and record visible changes. Note deposits, changes in solution color, gas formation, or the absence of a reaction. Do not leave electrodes in solutions longer than necessary: extensive metal deposition can coat and damage an electrode, requiring substantial cleaning and polishing before reuse.

Next, prepare half-cells by placing zinc, copper, and magnesium electrodes in their respective 1 M salt solutions for the standard-condition measurements. Connect two half-cells using a salt bridge made from filter paper soaked in saturated potassium nitrate or potassium chloride solution. The paper must contact both solutions. Connect the electrodes to a high-impedance voltmeter, briefly complete the circuit, record the voltage, and disconnect it; leaving the circuit connected allows the cell composition and measured potential to change over time.

Experiment: Nonstandard Conditions and Recording Results [42:53]

For nonstandard measurements, keep one half-cell at a constant 1 M concentration and change the concentration in another half-cell, such as using a 0.01 M zinc or magnesium solution. The choice of which half-cell stays constant is flexible, but the procedure should be applied consistently across the selected combinations. Measure each cell briefly, then disconnect it to avoid prolonged discharge and changes in concentration.

Record the measured potential and identify which electrode is the anode and which is the cathode. The sign of the voltmeter reading indicates polarity; if the reading is negative for the intended connection, reverse the leads and record the correct polarity. Use the standard potentials and Nernst equation to calculate expected values and compare them with measurements, then complete the required tables with the observations and results.

Watch the Video

Date: 11/18/2026 Source: www.youtube.com
Share

Stay Informed with Quality Articles

Discover curated summaries and insights from across the web. Save time while staying informed.

© 2024 BriefRead